LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Push Button Ignition Switch >> Removal

Push Button Ignition Switch: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the cover assembly - instrument panel LWR driver. <Ref. to REMOVAL , Instrument Panel Lower Cover.>
  3. Remove the visor assembly - lower.
    1. Release the clips and claws.
    2. Disconnect the connector and remove the visor assembly - lower.
      CAUTION: Be careful not to damage the clips and claws by slowly removing the right and left edges of visor assembly - lower.
      Fig 1: Identifying Clips And Claws
      G10272985Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the push button ignition switch.
    1. Release the claws and remove the push button ignition switch from the visor assembly - lower.
      Fig 2: Removing Push Button Ignition Switch
      G10272986Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals