LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System (Diagnostics) >> Inspection Mode >> Procedure >> Inspection Mode 2

Inspection Mode 2

DTC Item Note
B1012 BATT P/Supply Malfunction Backup -

Diagnostic procedure:

  1. Perform the Clear Memory Mode.
  2. Read the DTC and check that the DTC is not displayed.
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step  1).
  3. Disconnect and reconnect the backup fuse, and then wait for one minute or more.
  4. Read the DTC and check that the DTC is not displayed.
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
scientia non olet · About LEMON Manuals