LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) (Diagnostics) >> System Operation Check Mode >> Operation

System Operation Check Mode: Operation

CAUTION:
  • Make sure that the system operation check mode is performed when the engine is not running.
  • After executing the system operation check mode, execute the Clear Memory Mode.
  1. On «Main Menu» display, select «Each System Check».
  2. On «System Selection Menu» display, select «Transmission Control System».
  3. On «Transmission Control System» display, select «Work Support».
  4. On «Work Support» display, select «System Operation Check Mode».
    NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
    Item SSM display
    Activating the actuator ON/OFF F&R Clutch Solenoid
    Secondary Solenoid
    Primary Down Solenoid
    Primary Up Solenoid
    AWD Solenoid
    Lock-Up Duty Solenoid
    Lock-up ON/OFF Solenoid
scientia non olet · About LEMON Manuals