LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Diagnostic Trouble Code (DTC) Detecting Criteria (H4DO) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P050A Cold Start Idle Air Control System Performance >> Enable Conditions

Enable Conditions

ENABLE CONDITIONS

Secondary Parameters Enable Conditions
< Idle speed diagnosis >
Atmospheric pressure ≥ 75.1 kPa (563 mmHg, 22.2 inHg)
Battery voltage > 10.9 V
Vehicle speed ≤ 2 km/h (1.2 MPH)
Engine coolant temperature ≤ 60 °C (140 °F)
Intake air amount sum value ≤ Value of Map 1
Elapsed time after gear position change (P ←→ D or N ←→ D) ≥ 3000 ms
Throttle opening angle < 0.37 °
Fuel property Not extremely low volatility
Elapsed time after starting the engine ≥ 2000 ms
< Final ignition timing diagnosis >
Atmospheric pressure ≥ 75.1 kPa (563 mmHg, 22.2 inHg)
Battery voltage > 10.9 V
Vehicle speed ≤ 2 km/h (1.2 MPH)
Engine coolant temperature ≤ 60 °C (140 °F)
Intake air amount sum value ≤ Value of Map 2
Elapsed time after gear position change (P ←→ D or N ←→ D) ≥ 3000 ms
Throttle opening angle < 0.37 °
Fuel property Not extremely low volatility
Commanded ignition timing retard ≥ Value from Map 3
ENGINE COOLANT TEMPERATURE REFERENCE

Engine coolant temperature at engine starting °C (°F) -40 (-40) -30 (-22) -20 (-4) -10 (14) 0 (32) 10 (50) 20 (68) 30 (86) 40 (104) 50 (122) 60 (140) 70 (158) 80 (176) 90 (194) 100 (212) 110 (230)
Intake air amount sum value g (oz) 770 (27.16) 690 (24.34) 620 (21.87) 560 (19.75) 510 (17.99) 450 (15.87) 390 (13.76) 320 (11.29) 260 (9.17) 210 (7.41) 180 (6.35) 180 (6.35) 180 (6.35) 180 (6.35) 180 (6.35) 180 (6.35)
ENGINE COOLANT TEMPERATURE REFERENCE

Engine coolant temperature at engine starting °C (°F) -40 (-40) -30 (-22) -20 (-4) -10 (14) 0 (32) 10 (50) 20 (68) 30 (86) 40 (104) 50 (122) 60 (140) 70 (158) 80 (176) 90 (194) 100 (212) 110 (230)
Intake air amount sum value g (oz) 770 (27.16) 690 (24.34) 620 (21.87) 560 (19.75) 510 (17.99) 450 (15.87) 390 (13.76) 320 (11.29) 260 (9.17) 210 (7.41) 180 (6.35) 180 (6.35) 180 (6.35) 180 (6.35) 180 (6.35) 180 (6.35)
ENGINE COOLANT TEMPERATURE REFERENCE

Engine coolant temperature -40 °C (-40 °F) -30 °C (-22 °F) -20 °C (-4 °F) -10 °C (14 °F) 0 °C (32 °F) 10 °C (50 °F) 20 °C (68 °F) 30 °C (86 °F) 40 °C (104 °F) 50 °C (122 °F) 60 °C (140 °F)
Commanded ignition timing retard (AT model) 21 °CA 21 °CA 21 °CA 21 °CA 21 °CA 21 °CA 21 °CA 21 °CA 21 °CA 21 °CA 21 °CA
Commanded ignition timing retard (MT model) 11 °CA 11 °CA 11 °CA 11 °CA 11 °CA 11 °CA 11 °CA 11 °CA 11 °CA 11 °CA 11 °CA