Security System On/Off Setting
NOTE:
It can be set by «Security Alarm Setup» in unit customizing using Subaru Select Monitor.
For detailed procedures, refer to "PC application help for Subaru Select Monitor".
For detailed procedures, refer to "PC application help for Subaru Select Monitor".
- Close all doors, trunk lid or rear gate, and sit down on the driver seat. Press the UNLOCK button of the keyless transmitter or access key.
- Turn the ignition to ON.
- Press the central door unlock switch and open the driver's door simultaneously. (Keep the central door unlock switch pressed down.)
- When the condition in step 3) continues for 10 seconds, the system switches to a mode reverse to the current mode.
Setting Horn activation Meter display ON → OFF Twice [AL_OF] OFF → ON Once [AL_ON]