LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) (Diagnostics) >> Drive Cycle >> Procedure >> Drive Cycle D

Drive Cycle D

DTC Item Condition
P0713  Transmission Fluid Temperature Sensor Circuit High Input -
P0730  Gearshift Control Performance Abnormal -
P0746  Pressure Control Solenoid "A" Performance/Stuck Off Perform the drive cycle D twice.
P0747  Pressure Control Solenoid "A" Stuck On Perform the drive cycle D twice.
P0751  Shift Solenoid "A" Performance/Stuck Off Perform the drive cycle D twice.
P0752  Shift Solenoid "A" Stuck On Perform the drive cycle D twice.
P0756  Shift Solenoid "B" Performance/Stuck Off Perform the drive cycle D twice.
P0757  Shift Solenoid "B" Stuck On Perform the drive cycle D twice.
P0776  Pressure Control Solenoid "B" Performance/Stuck Off Perform the drive cycle D, then the drive cycle A, and perform the drive cycle D again.
P0841  Secondary Oil Pressure Sensor Performance -
P0961  Pressure Control Solenoid "A" Control Circuit Range/Performance -
P0965  Forward & Reverse Solenoid Function -
P2757  Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance/Stuck Off Perform the drive cycle D twice.
P2758  Torque Converter Clutch Pressure Control Solenoid Control Circuit Stuck On Perform the drive cycle D twice.

Diagnostic procedure: 

  1. Start the engine.
  2. Drive in any driving pattern for 20 minutes. (Include driving at a constant legal speed (for 20 seconds) at least once.)