LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> Outback 2.5i Limited >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Power Amplifier >> Removal

Power Amplifier: Removal

NOTE: Remove the power amplifier assembly after sliding the passenger's seat back and forth as necessary.
  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the power amplifier - assembly.
    1. Remove the harness clip, and disconnect each connector.
    2. Remove the nut and remove the power amplifier - assembly.
      Fig 1: Removing Power Amplifier - Assembly
      G10272649Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals