Secondary Speed Sensor: Installation
CAUTION:
- Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.
- After installing the secondary speed sensor, adjust the CVTF level.
Install in the reverse order of removal.
NOTE:
- Use new O-rings.
- Apply CVTF to the O-ring.
Tightening torque:
Secondary speed sensor
7 N.m (0.7 kgf-m, 5.2 ft-lb)
Under cover front - transmission
18 N.m (1.8 kgf-m, 13.3 ft-lb)