Unit Inspection

Preparation tool: Circuit tester 

1. Check the resistance between switch terminals.
   Fig 1: Checking Resistance Between Switch Terminals

   Courtesy of SUBARU OF AMERICA, INC.

   Terminal No.	Inspection conditions		Standard
   3 - 2	↑ (UP) i/SET ↓ (DOWN)	All OFF	1 MΩ or more
   3 - 2	↑ (UP)	ON	Less than 1 Ω
   3 - 2	i/SET	ON	Approx. 1000 Ω
   3 - 2	↓ (DOWN)	ON	Approx. 3670 Ω

2. Replace the switch assembly - steering if the inspection result is not within the standard.