Inspection steps
CAUTION:
Never try to clean the throttle body assembly (with motor).
- Read DTC
- Connect the SSM3 to the DLC3.
- Turn the ignition switch to ON.
- Turn on the SSM3.
- Follow the SSM3 on-screen instructions to check the DTC. (Refer to CHECKING/CLEARING DTC
)
Result
Result Go to P1109 or P2109 is output. A Either P1109 or P2109, and other DTCs are output. B B: To corresponding DTC chart (refer to DTC TABLE )
A: Replacement of throttle body assembly (with motor) (refer to REMOVAL )