LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> BRZ Limited, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Trunk Opening Switch Assembly >> Unit Inspection

Unit Inspection

  1. Inspection of the trunk opening switch assembly
    1. Inspection of the trunk opening switch assembly
      1. Check the resistance between the connector terminals.

        Resistance

        RESISTANCE REFERENCE

        Inspection terminals Inspection conditions Standard value
        4 - 1 When the switch is not in use (OFF) 10 kΩ or more
        4 - 1 When the switch is in use (ON) Less than 1 Ω
        Fig 1: Trunk Opening Switch Assembly Connector Terminal Identification
        G10217637Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals