LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Control System (Service Information)) >> Accelerator Pedal Rod Assembly (FA20) >> Removal

Accelerator Pedal Rod Assembly (FA20): Removal

WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
  2. Removal of accelerator pedal sensor assembly
    1. Disconnect the connector for accelerator pedal sensor assembly.
    2. Remove 2 nuts, and remove the accelerator pedal sensor assembly.
      Fig 1: Locating Accelerator Pedal Sensor Assembly Mounting Nuts
      G08554002Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals