Antenna Cord: Installation
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Install the antenna cord SUB-ASSY.
- Fasten the ten clamps and install the antenna cord SUB-ASSY.
- Connect each connector.
- Return the floor mat to its original position.
- Install the air conditioner radiator ASSY. (Refer to INSTALLATION )
- Install the instrument panel SUB-ASSY. (Refer to INSTALLATION )
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
- Inspect the airbag warning light. (Refer to AIRBAG WARNING LIGHT ILLUMINATION PATTERN )
- Settings when connecting/disconnecting battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )