Passenger's Airbag Module: Installation
WARNING: This page is about a different car, the 2014 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The following service operations include the works which may affect the SRS airbag system. Before starting work, always be sure to confirm the precautions related to the SRS airbag system. (Refer to
SRS AIRBAG SYSTEM
)
CAUTION:
Do not allow the harnesses and the connectors to interfere or get tangled with other parts.
- Installation of the passenger's airbag module
- Before installation, inspect the following items and replace any faulty part with a new one.
- Passenger's airbag lid (instrument panel surface) is cracked or deformed.
- Airbag module is cracked or deformed.
- Harness and/or connector is cracked, deformed or broken.
- Harness wire is exposed.
- Mounting bracket is cracked or deformed.
- Engage 5 vehicle rear hooks on the passenger's airbag module, and install it on the vehicle rear side of the airbag door wall.
- Push in the passenger's airbag module, and engage 5 vehicle front hooks with the vehicle front side of the airbag door wall.
- Before installation, inspect the following items and replace any faulty part with a new one.
- Installation of the instrument panel SUB-ASSY (Refer to INSTALLATION )
- Inspection of the airbag warning light (Refer to AIRBAG WARNING LIGHT ILLUMINATION PATTERN )