LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnostics (3 Of 3) >> DTC P1235 High-Pressure Fuel Pump Abnormal >> Description of functions >> Test drive

Test drive

Perform test drive to check if the DTC recurs.

  1. Connect the SSM3 to the DLC3.
  2. Turn the ignition switch to ON.
  3. Follow the SSM3 on-screen instructions to clear the DTCs. (Refer to CHECKING/CLEARING DTC )
  4. Turn the ignition switch to OFF, and wait for 30 seconds.
  5. Drive the vehicle several times under the conditions recorded in the freeze frame data, such as engine speed and engine load.
  6. Follow the SSM3 on-screen instructions to check the DTCs. (Refer to CHECKING/CLEARING DTC )
scientia non olet · About LEMON Manuals