LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2015 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Wireless Door Lock Control System (W/ Entry Start) >> Wireless Door Lock Control System (With Entry & Start System) >> Checking/Clearing Diagnostic Codes

Checking/Clearing Diagnostic Codes

  1. Check DTC
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch (IG) to ON.
    3. Turn on the SSM3.
    4. Enter the following menus: [Integ. unit mode] →[Diagnostic Code(s) Display]
    5. Check the DTC.
  2. Clear the DTC.
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch (IG) to ON.
    3. Turn on the SSM3.
    4. Enter the following menus: [Integ. unit mode] →[Clear Memory]
    5. Clear DTC according to the following instructions displayed on the SSM3 screen.
scientia non olet · About LEMON Manuals