Cruise Control Main Switch: Removal

Disconnection of the battery ground terminal (Refer to WORKING PRECAUTIONS AND NOTES )
WARNING: Airbag and pretensioner system are equipped with back-up power supply. Therefore, if any operation is started within 60 seconds after disconnecting the battery ground terminal, the airbag can deploy.
Remove Steering Wheel Assembly (See REMOVAL )
Remove Cruise Control Main Switch Assembly
1. Remove the 4 screws.
2. Engage the 2 claws and remove the lower steering wheel cover and cruise control main switch assembly.
3. Disengage the clamp and disconnect the cruise control main switch wire connector.
  
  Fig 1: Locating Cruise Control Main Switch Assembly Screws
  Courtesy of SUBARU OF AMERICA, INC.