LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Tribeca >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Rear Drive Shaft >> Removal

Rear Drive Shaft: Removal

  1. Remove the transmission assembly from the vehicle. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the rear vehicle speed sensor, and then remove the extension case. < Ref. to REMOVAL , Extension Case. >
  3. Pull out the rear drive shaft from center differential assembly.
    Fig 1: Identifying Rear Drive Shaft
    G05022299Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the drive plate and driven plate.
scientia non olet · About LEMON Manuals