Entertainment System: Audio: Removal

Disconnect the ground cable from battery.
Remove the ring indicator (A) and console front panel (B).

Fig 1: Removing Ring Indicator And Console Front Panel
Courtesy of SUBARU OF AMERICA, INC.

NOTE: The ring indicator can be easily removed by inserting the clip remover or equivalent into the positions indicated by arrows.
Remove the instrument ornament on passenger's seat and inner panels on driver's seat.

Fig 2: Identifying Passenger's Seat Instrument Ornament And Driver's Seat Inner Panels
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws, and pull out the front control panel.

Fig 3: Identifying Control Panel Mounting Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the harness connectors and remove the front control panel.
Remove the screws, and partially pull the audio out from center console.

Fig 4: Identifying Center Console Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the harness connector and antenna feeder cord, and then remove the audio.