LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Glass/Window/Mirrors) >> Power Window System >> Operation >> Reset Operation B

Reset Operation B

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Sit in the driver's seat and close the door.
  2. Turn the ignition switch to ON.
  3. On the glass assembly - front door of the driver's side, operate the "AUTO UP" function (fully pull up the switch) using the switch - power window main, and perform auto-reverse operations 10 times in a row (after the window fully closes, it slightly opens).
  4. Check that the "AUTO UP" function no longer operates.
  5. Perform reset operation A.
  6. Check that the window operates properly by operating the "AUTO UP" and "AUTO DOWN" switch.
    NOTE: If the window does not fully open/close properly, repeat steps  1) to  6).