Room Light: Removal

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the light assembly - room.
CAUTION: When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
1. Release the claws and remove the lens.
2. Remove the screws and pull out the light assembly - room.
  
  Fig 1: Locating Room Light Assembly Screws
  Courtesy of SUBARU OF AMERICA, INC.
3. Disconnect the connector and remove the light assembly - room and the bulb.
  
  Fig 2: Removing Room Light Assembly And Bulb
  Courtesy of SUBARU OF AMERICA, INC.