LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Lighting System) >> High-mounted Stop Light >> Inspection

High-mounted Stop Light: Inspection

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the light to test if it illuminates normally.
  2. If it fails to illuminate normally, replace the light assembly - high-mounted with a new part.
    NOTE: Since LED (Light Emitting Diode) is used for the light, replace the light assembly - high-mounted if the LED burns out.
scientia non olet · About LEMON Manuals