LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Power Rear Gate System (Service Information)) >> Power Rear Gate Driver's Switch >> Removal

Power Rear Gate Driver's Switch: Removal

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The power rear gate driver's switch is integrated with the VDC OFF switch.
  1. Disconnect the ground cable from battery.
  2. Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  3. Remove the VDC OFF & power rear gate driver's switch.
    1. Release the claws and pull out each switch.
    2. Remove the connector from the panel - switch, and then remove the VDC OFF & power rear gate driver's switch.
      Fig 1: Identifying Power Rear Gate Driver's Switch
      G09483448Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals