Unit Inspection

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Preparation tool: Circuit tester

Check the resistance between switch terminals.

Fig 1: Checking Resistance Between Switch Terminals

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions		Standard
3 - 2	(UP) i/SET (DOWN)	All OFF	1 MΩ or more
3 - 2	(UP)	ON	Less than 1 Ω
3 - 2	i/SET	ON	Approx. 1000 Ω
3 - 2	(DOWN)	ON	Approx. 3670 Ω

Replace the switch assembly - steering if the inspection result is not within the standard.