LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Instrumentation/Driver Info (Service Information)) >> Multi-function Display (MFD) >> Installation

Multi-function Display (MFD): Installation

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Make sure the electrical connector is connected securely.
  • Make sure that the multi-function display operates normally.
  • After installing the panel center assembly, check that the air vent grille of the panel center assembly is inserted correctly into the air vent duct.

Install each part in the reverse order of removal.

scientia non olet · About LEMON Manuals