Read Current Data: List
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Combination meter
Items to be displayed Unit of measure Remarks Note Power on trip number times Information of timestamp - Power on supply system - Information of timestamp - Past time after power on ms Information of timestamp - Fuel sensing value Ω Fuel sensor value display - External air temperature sensing value °C External temperature sensor value display - External air temperature indication value °C Calculated value of external temperature for indication - Vehicle speed data km/h (MPH) Vehicle speed value detected by meter - Engine revolution data rpm Engine speed value detected by meter - Drivers seat seat-belt wearing state - Displays ON/OFF - Passenger seat seat-belt wearing state - Displays ON/OFF - Rear seat right seat-belt wearing state - Displays ON/OFF - Rear seat center seat-belt wearing state - Displays ON/OFF - Rear seat left seat-belt wearing state - Displays ON/OFF - - Multi-Function Display (MFD)
Items to be displayed Unit of measure Remarks Note Multi-Function Display (MFD) hardware fail flag Normal/Multi-Function Display (MFD) Fail Multi-Function Display (MFD) abnormal status - Multi-Function Display (MFD) U-ART communication error flag Normal/Multi-Function Display (MFD) U-ART Fail - Multi-Function Display (MFD) CAN communication error flag Normal/Multi-Function Display (MFD) CAN Fail - Multi-Function Display (MFD) destination abnormal flag Normal/Multi-Function Display (MFD) destination error - Multi-Function Display (MFD) failure information No error
High-speed CAN error counter abnormal
High-speed CAN bus OFF detection
High-speed CAN data abnormal
High-speed CAN data not received
UART data abnormal
UART data not received
IGN line wire break
System microcomputer abnormal
GERDA abnormal- Birthday1 setting M - Birthday setting value - Birthday1 setting D - - Birthday2 setting M - Birthday setting value - Birthday2 setting D - - Anniversary1 setting M - Anniversary setting value - Anniversary1 setting D - - Anniversary2 setting M - Anniversary setting value - Anniversary2setting D - - Driving record1 setting Yard - Driving record 1 setting value - Driving record1 setting Time - - Driving record1setting fuel cons. Ave. - - Driving record1 setting M - - Driving record1 setting D - - Driving record2 setting DIS - Driving record 2 setting value - Driving record2 setting Time - - Driving record2setting fuel cons. Ave. - - Driving record2 setting M - - Driving record2 setting D - - Clock/OFF setting OFF
External air temperature + analog clock
External air temperature + digital clockClock display setting - Engine oil maintenance setting Y - Oil maintenance setting value - Engine oil maintenance setting M - - Engine oil maintenance setting D - - Engine oil maintenance setting meter - - Oil filter maintenance setting Y - Oil filter maintenance setting value - Oil filter maintenance setting M - - Oil filter maintenance setting D - - Oil filter maintenance setting meter - - Tire maintenance setting Y - Tire maintenance setting value - Tire maintenance setting M - - Tire maintenance setting D - - Tire maintenance setting meter - - Engine oil maintenance setting Y - Periodic inspection setting value - Engine oil maintenance setting M - - Engine oil maintenance setting D - - Engine oil maintenance setting meter - - Sub-meter(left) setting NO1 Indication OFF
AVG speed
ODO fuel efficiency
ECVT Fluid Temp.
Accel opening angle
Section time
Section distance
Section fuel efficiencyMeter display setting - Sub-meter(left) setting NO2 Analog display
Digital displayMeter display setting - Sub-meter(center) setting NO1 Indication OFF
AVG speed
ODO fuel efficiency
ECVT Fluid Temp.
Accel opening angle
Section time
Section distance
Section fuel efficiencyMeter display setting - Sub-meter(center) setting NO2 Analog display
Digital displayMeter display setting - Sub-meter(right) setting NO1 Indication OFF
AVG speed
ODO fuel efficiency
ECVT Fluid Temp.
Accel opening angle
Section time
Section distance
Section fuel efficiencyMeter display setting - Sub-meter(right) setting NO2 Analog display
Digital displayMeter display setting - Multi-Function Display (MFD) brightness setting NO1 -5 - +5 Multi-Function Display (MFD) setting - Multi-Function Display (MFD) brightness setting NO2 -5 - +5 Multi-Function Display (MFD) setting - Multi-Function Display (MFD) contrast setting NO1 -5 - +5 Multi-Function Display (MFD) setting - Multi-Function Display (MFD) contrast setting NO2 -5 - +5 Multi-Function Display (MFD) setting - ECO evaluation ON-OFF setting OFF/ON Multi-Function Display (MFD) setting - Info area setting OFF
Avg. F/E
FUEL CONS
RangeMulti-Function Display (MFD) setting - Menu language setting (Corresponding languages) Multi-Function Display (MFD) setting - Buzzer volume setting OFF
Small
LoudMulti-Function Display (MFD) setting - Fuel cons. Setting 00/OFF Multi-Function Display (MFD) setting - Auto Start Stop interrupt display setting OFF/ON Multi-Function Display (MFD) setting Not applicable Welcome display ON-OFF setting OFF/ON Multi-Function Display (MFD) setting - Self check ON-OFF setting OFF/ON Multi-Function Display (MFD) setting -
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".