Satellite Safing Sensor: Installation
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.
- When installing the cover - satellite safing, push the cover securely until it contacts the floor panel.
- If the cover - satellite safing is too loose at its mounting portion to remove easily, replace with a new cover - satellite safing.
- After installing the cover - satellite safing, make sure that the sensor harness does not get caught.
Install each part in the reverse order of removal.
Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)