LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Exterior/Interior Trim) >> Front Bumper >> Installation

Front Bumper: Installation

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install each part in the reverse order of removal.
  2. Secure the flange section of the bumper face - front to the bracket - front bumper side.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description". < Ref. to  FRONT BUMPER  , COMPONENT, General Description. > 

  3. Install each part in the reverse order of removal.
  4. Adjust the headlight beam and fog light beam.
    • Adjust the headlight beam. < Ref. to HEADLIGHT BEAM ADJUSTMENT , ADJUSTMENT, Headlight Assembly. >
    • Adjust the fog light beam. (Model with fog light) < Ref. to FOG LIGHT AIMING , ADJUSTMENT, Front Fog Light Assembly. >
scientia non olet · About LEMON Manuals