LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Fuel Injection Fuel Systems (H4DO)) >> Engine Oil Temperature Sensor >> Removal

Engine Oil Temperature Sensor: Removal

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Disconnect the connector (A) from the engine oil temperature sensor, and remove the engine coolant temperature sensor from the chain cover.
    Fig 1: Locating Engine Oil Temperature Sensor Connector
    G08562614Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals