LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Fuel Injection Fuel Systems (H4DO)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Drain engine coolant. < Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant. >
  3. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G09475519Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals