Read Current Data: List
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
| Item Name | Content | Standard | Note |
|---|---|---|---|
| Trip Count | Information of timestamp, trip counter | - | - |
| Count | Information of timestamp, original counter identification information | - | - |
| Time Count | Information of timestamp, time counter | - | - |
| F Sensor Signal | Output voltage value from front vehicle height sensor Display range: 0.00 - 5.00 V |
5V | Fixed at 5 V because front vehicle height sensor is not equipped. |
| R Sensor Signal | Output voltage value from rear vehicle height sensor Display range: 0.00 - 5.00 V |
Approx. 2.5 V | Changes according to vehicle condition. |
| Actuator Signal | Power supply voltage value to headlight beam leveler actuator Display range: 0% - 100% |
Not in operation: 0% In operation: 10 - 90% (17 seconds) |
Changes according to vehicle condition. |
| ECU ACC | IG voltage condition of auto headlight beam leveler CM Display range: 0.00 - 25.76 V |
8 - 16 V | - |
| Indicator Signal | Meter indicator condition Display range: Light off/Light up/Flashing |
Light off: Normal Light up: Abnormal Blink: Not initialized |
- |
| Vehicle speed signal | Vehicle speed condition Display range: 0.00 - 3686.34 km/h |
Show vehicle speed | - |
| H/L Lo Signal | Headlight lighting condition Display range: Light off/Light up |
Light off: light switch OFF Light up: light switch HEAD or light switch AUTO with light sensor operated |
- |
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".