LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Outback 2.5i Premium, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (General Information) >> Brake Line >> Inspection >> Brake Line

Brake Line

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for scratches, swelling, corrosion, traces of fluid leakage on the brake hoses or pipe joints.
  2. Make sure that brake pipes/hoses do not interfere with adjacent parts and there is no loose connector/clamp during driving.
  3. Check any trace of fluid leakage, scratches, etc. on master cylinder, wheel cylinder and hydraulic unit.
    NOTE:
    • When the brake fluid level in the reservoir tank is lower than specified limit, the brake warning light on the combination meter will illuminate.
    • Visually check the brake hose for damage. (Use a mirror where it is difficult to see)
      Fig 1: Locating Front Brake Hose, Pipe And Clamp
      G09475437Courtesy of SUBARU OF AMERICA, INC.
      Fig 2: Locating Rear Brake Hose, Pipe And Clamp
      G09475438Courtesy of SUBARU OF AMERICA, INC.