Glove Box Lid

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the pocket assembly.
1. Attach the protective tape (a) to the panel center LWR.
2. Remove the damper COMPL - pocket.
3. Release the stoppers and remove the pocket assembly by pulling it toward you.
  
  Fig 1: Locating Glove Box Lid
  Courtesy of SUBARU OF AMERICA, INC.
Replace the key cylinder.
1. Pull up the lock knob.
2. Push out the key cylinder from the pocket assembly while pressing in the metal plate.
  
  Fig 2: Pushing Out Key Cylinder From Pocket Assembly
  Courtesy of SUBARU OF AMERICA, INC.
Install each part in the reverse order of removal.