LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Legacy 2.5i, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Security And Locks) >> Immobilizer Antenna >> Removal >> Models With Keyless Access

Models With Keyless Access

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Immobilizer antenna is integrated with the push button ignition switch.
  1. Remove the cover assembly - instrument panel LWR driver. < Ref. to REMOVAL , Instrument Panel Lower Cover. >
  2. Remove the push button ignition switch.
    1. Disconnect the connector, and remove the aspirator hose.
      Fig 1: Locating Push Button Ignition Switch
      G08316199Courtesy of SUBARU OF AMERICA, INC.
    2. Release the claws, and then remove the panel - switch.
    3. Release the claws, and then remove the push button ignition switch from the panel - switch.
      Fig 2: Identifying Push Button Ignition Switch From Panel - Switch
      G09483949Courtesy of SUBARU OF AMERICA, INC.