Unit inspection

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Preparation tool:

Circuit tester

Check the resistance between switch terminals.

Terminal No.	Inspection conditions	Standard	Connection diagram
-	Switch OFF	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 3	Switch ON	Less than 1 Ω	Courtesy of SUBARU OF AMERICA, INC.
2 - 3	Switch door	Less than 1 Ω	Courtesy of SUBARU OF AMERICA, INC.

Apply battery voltage to check the lighting condition of the light.

Terminal No.	Inspection conditions	Specification	Connection diagram
3 (+) - 1, 2 (-)	Switch OFF	Light OFF	Courtesy of SUBARU OF AMERICA, INC.
	Switch ON	Light ON
	Switch door	Light ON

Replace the light assembly - room if the inspection result is not within the standard value.