LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Impreza WRX STI Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (STI) >> Oil Flow Control Solenoid Valve >> Removal >> Exhaust Side

Exhaust Side

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G08538797Courtesy of SUBARU OF AMERICA, INC.
  2. Lift up the vehicle.
  3. Remove the under cover. < Refer to REMOVAL , Front Under Cover. >
  4. Remove the front exhaust pipe. (right side only.) < Refer to REMOVAL , Front Exhaust Pipe. >
  5. Remove the engine harness cover. (right side only.)
    Fig 2: Identifying Engine Harness Cover
    G08538798Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the ground cable (A). (left side only)
  7. Disconnect the connector (B) from the oil flow control solenoid valve, and remove the oil flow control solenoid valve from the cylinder head.
    Fig 3: Identifying Oil Flow Control Solenoid Valve Connector And Ground Cable
    G08538799Courtesy of SUBARU OF AMERICA, INC.