Read Current Data
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Brake Control System}.
- When {VDC} is displayed, select the [OK] button.
- On «Brake Control Diagnosis» display, select {Current Data Display & Save}.
- On «Data Display Menu» display, select the data display method.
- Using the scroll key, scroll the display screen up or down until necessary data is shown.
- A list of the support data is shown in the following table.
Display Contents to be displayed Unit of measure FR Wheel Speed Wheel speed detected by front ABS wheel speed sensor RH is displayed. km/h or MPH FL Wheel Speed Wheel speed detected by front ABS wheel speed sensor LH is displayed. km/h or MPH RR Wheel Speed Wheel speed detected by rear ABS wheel speed sensor RH is displayed. km/h or MPH RL Wheel Speed Wheel speed detected by rear ABS wheel speed sensor LH is displayed. km/h or MPH Steer Angle Sensor Op Steering angle detected by steering angle sensor is displayed. deg Yaw Rate Sensor Output Vehicle angular speed detected by yaw rate sensor is displayed. deg/s Pressure Sensor Output Brake fluid pressure detected by pressure sensor is displayed. bar Lateral G sensor Output Vehicle lateral acceleration detected by lateral G sensor is displayed. m/s2 IG power supply voltage Voltage supplied to VDCCM&H/U is displayed. V E/G Control Stop Flag Engine control command signal is displayed. 1 or 0 ABS Control Flag ABS operation condition is displayed. ON or OFF EBD Control Flag EBD operation condition is displayed. ON or OFF TCS Control Flag TCS operation condition is displayed. ON or OFF VDC Control Flag VDC operation condition is displayed. ON or OFF OFF Lamp ON/OFF condition of VDC OFF & VDC traction mode indicator light (6MT model) or VDC OFF indicator light (5MT model) is displayed. ON or OFF EBD Warning Light ON operation of the EBD warning light is displayed. ON or OFF ABS Warning Light ON operation of the ABS warning light is displayed. ON or OFF VDC Warning Light ON operation of the VDC warning light is displayed. ON or OFF Valve Relay Signal Valve relay operation signal is displayed. ON or OFF Motor Relay Signal Motor relay operation signal is displayed. ON or OFF M. Relay monitor Voltage Voltage applied to the motor relay is displayed. V OFF SW Signal Operation condition of VDC OFF switch is displayed. ON or OFF Brake SW Brake ON/OFF is displayed. ON or OFF Fr Rr G sensor Output Vehicle longitudinal acceleration detected by longitudinal G sensor is displayed. m/s2 Clutch Signal Clutch ON/OFF is displayed. ON or OFF Reverse Signal Reverse gear ON/OFF is displayed. ON or OFF
NOTE:
For detailed operation procedures, refer to "Subaru Select Monitor" operating information.