LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> Impreza Base, 4D Sedan >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection Fuel Systems (Except Hybrid) >> Tumble Generator Valve Assembly >> Inspection >> Check Motor

Check Motor

  1. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal No. 4, and check that the valve is fully opened on LH side and the valve is fully closed on RH side.
    CAUTION: Do not power the motor for more than 10 seconds.
    Fig 1: Checking Valve (Full Open And Closed)
    G09477045Courtesy of SUBARU OF AMERICA, INC.
  2. Connect the battery positive terminal to terminal No. 4 and the battery ground terminal to terminal No. 5, and check that the valve is fully closed on LH side and the valve is fully opened on RH side.
    CAUTION: Do not power the motor for more than 10 seconds.
    Fig 2: Checking Valve (Full Open And Closed)
    G09477046Courtesy of SUBARU OF AMERICA, INC.