Rear Seat Inner Belt Assembly: Installation

NOTE: The procedures described below are for the RH side. Perform the same procedures for the LH side.

Installation of the rear seat belt assembly inner
1. Install the rear seat belt assembly inner RH with the bolt in the direction shown in the figure.
  Standard value: T=30N.m {306kgf.cm} {22.1ft.lbf}
  
  Fig 1: Locating Rear Seat Belt assembly Inner RH And Bolt
  Courtesy of SUBARU OF AMERICA, INC.
Installation of separate type rear seat cushion assembly (Refer to INSTALLATION )