LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) - Introduction & DTC Index >> EFI System (FA20) >> Freeze Frame Data

Freeze Frame Data

  1. Check freeze data (reading with SSM3)
    NOTE: When the DTC is stored, the ECM data which indicates the vehicle status at that time is stored to the engine control computer as freeze frame data.
    1. Connect the SSM3 to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn on the SSM3.
    4. Select the following menu items using the SSM3: [BRZ check] / [Each System Check] / [Engine Control System] / [Freeze Frame Data Display]
  2. Pending freeze frame data
    NOTE: For DTCs that detect error in two trips, store the freeze frame data when the temporary error is detected in the first trip.
  3. List of freeze frame data

    For the list of freeze frame data, refer to [CURRENT DATA DISPLAY & SAVE] / [SYSTEM OPERATION CHECK MODE ] .

scientia non olet · About LEMON Manuals