LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2014 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Crankshaft Position Sensor (FA20) >> Unit Inspection

Unit Inspection

  1. Crankshaft position sensor check
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Resistance
      1 - 2 Always 1836 to 2244 Ω
      Fig 1: Identifying Crankshaft Position Sensor Connector Terminals
      G08554016Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals