SUBARU Select Monitor (OBD Mode)
- On the «Main Menu», select {Each System Check}.
- On the «System Selection Menu», select {Engine Control System}.
- Click the [OK] key after the information regarding engine type has been displayed.
- On the «Engine Diagnosis» display screen, select the {OBD System}.
- On the «OBD Menu» display screen, select the {Diagnostic Code(s) Display}.
- Make sure DTC is shown on the screen.
NOTE:
- For detailed operation procedure, refer to the " Subaru Select Monitor".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)". Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC)