LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Tribeca >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Security System >> Inspection >> Security System On/Off Setting

Security System On/Off Setting

  1. Close all doors and rear gate, and sit in the driver's seat. Press the UNLOCK button of the keyless transmitter.
  2. Turn the ignition switch to ON.
  3. Push the centralized door lock switch down and open the driver's side door at the same time, and hold in this condition for 10 seconds
  4. If the security system is ON, it will turn OFF. If OFF, it will turn ON.
Setting Horn activation Meter display
ON → OFF Twice [AL_OF]
OFF → ON Once [AL_ON]
scientia non olet · About LEMON Manuals