MFD Error Display And Fault Content
| Display contents |
Fault cause |
| CHECK_DISC |
- During playback, it was not possible to read data from the CD due to scratches on the CD, etc.
- Disc inserted upside-down, cannot detect disc.
- Because of a focus error, cannot read disc.
- An error occurred in the decoder section.
- A problem occurred in the internal circuit during playback due to high temperature, etc.
|
| MECHA_ERROR |
- During disc loading, a problem occurred in the traverse drive.
- Operation became impossible during disc change, loading, or eject.
|
| NO_FILE |
- After disc read operation is completed, the number of files was 0.
- A disc with no data was inserted.
|
- Disc is dirty, or is upside down.
- Nothing is recorded.
- Is not an audio disc.
- There are scratches on the disk.
- A disc that cannot be played back was used.
|
| A mechanical error/operational error of some sort occurred. |
| No disc is inserted. |
NOTE:
When the above errors are displayed, check the disc, and if no problems can be found, repair or replace the unit.