Function Setting (ECM Customizing)

On «Main Menu» display, select {Each System Check}.
On «System Selection Menu» display, select {Integ. unit mode}.
On «Integ. unit mode failure diag.» display, select {Unit customizing}.

Change the setting.

List of function setting item (ECM customizing)

NOTE: Even if items that are not equipped are changed, contents of the change will not be confirmed, and will not operate.

Data	Initial setting value	Customize setting	Remarks		Destination Specifications
Off delay time	Normal		Delay time below can be selected by setting.
			After door closed	After keyless unlock
		OFF	0 seconds	0 seconds
		Short	12 seconds	35 seconds
		Normal	22 seconds
		Long	32 seconds
Auto lock time	30s	0 - 60s	Workable when Auto locking is set to "ON" and Automatic locking setup is "ON". Time can be changed by 10 seconds: 0 (OFF) - 60 (maximum).		Not applicable for North American models
Rr Defogger op. mode	15 mins	15 mins	Automatically stops in 15 minutes after switch is turned to ON.
Rr Defogger op. mode	15 mins	Continuous	Repeats active condition for 15 minutes and inactive condition for 2 minutes until switch is turned to OFF.
Wiper deicer op. mode	15 mins	15 mins	Automatically stops in 15 minutes after switch is turned to ON.
Wiper deicer op. mode	15 mins	Continuous	Repeats active condition for 15 minutes and inactive condition for 2 minutes until switch is turned to OFF.
Security Alarm Setup	ON	ON	Security alarm (hazard, horn) in active condition
Security Alarm Setup	ON	OFF	Security alarm in inactive condition
Impact Sensor Setup	OFF	ON	Workable when impact sensor setup is set to "ON". Impact sensor function becomes activated.
Impact Sensor Setup	OFF	OFF	Impact sensor in inactive condition (Make sure to set to "OFF" for models without sensor.)
Alarm delay setup	ON		After the keyless lock operation, the alarm monitor starts after the following delay time has passed.
		ON	Delay time is 30 seconds.
		OFF	Delay time is 0 seconds.
Lockout prevention	ON	ON	key lockout prevention function is activated. (The function does not operate if safety knob is locked by hand.)
Lockout prevention	ON	OFF	Key lockout prevention function is deactivated.
Impact sensor	OFF	ON	Vehicle is controlled in impact sensor equipped mode. (Make sure to set to "OFF" for models without the impact sensor. When "ON", hazard, horn or siren become activated by keyless lock (alarm monitor start).)		When optional impact sensor is installed, set to "ON".
Impact sensor	OFF	OFF	Vehicle is controlled in no impact sensor mode.		When optional impact sensor is installed, set to "ON".
Siren setting	OFF	ON	When security alarm is in operation, siren is operating. (Make sure to set to "OFF" for models without siren. If set to "ON", horn does not operate when security alarm in operation.)		Not applicable for U.S. models
Siren setting	OFF	OFF	When security alarm is in operation, horn is operating.		Not applicable for U.S. models
Answer-back buzzer setup	ON	ON	Workable when answer-back buzzer setup is set to "ON". When lock/unlock is selected by keyless entry system operation, buzzer operates.
Answer-back buzzer setup	ON	OFF	When lock/unlock is selected by keyless entry system operation, buzzer does not operate.
Hazard answer-back setup	ON	ON	Workable when hazard answer-back setup is set to "ON". When lock/unlock is selected by keyless entry system operation, buzzer operates.
Hazard answer-back setup	ON	OFF	When lock/unlock is selected by keyless entry system operation, buzzer does not operate.
Automatic locking setup	ON	ON	Workable when automatic locking setup is "ON". Automatic locking operates.		Not applicable for U.S. models
Automatic locking setup	ON	OFF	Automatic locking does not operate.		Not applicable for U.S. models
Ans.-back Buzzer	ON	ON	Vehicle is controlled in answer-back buzzer equipped mode.		Not applicable for U.S. models
Ans.-back Buzzer	ON	OFF	Vehicle is controlled in answer-back buzzer non-equipped mode. (Make sure to set to "OFF" for models without answer-back buzzer.)		Not applicable for U.S. models
Auto locking	ON	ON	Vehicle is controlled in auto locking equipped mode.		Not applicable for U.S. models
Auto locking	ON	OFF	Vehicle is controlled in auto locking non-equipped mode. (Make sure to set to "OFF" for models without auto locking.)		Not applicable for U.S. models
Initial keyless setting	-	-	-
Initial keyless setting	-	Execution	Settings of keyless entry system are initialized. (Time of auto locking: 30 sec, answer-back buzzer setting: ON, hazard answer-back setting: ON, auto locking setting: ON, answer-back buzzer setting: ON)
Initial button setting	-	-	-		(Off delay time: Normal, rear defogger operation mode: 15 mins, wiper deicer operation mode: 15 mins, lockout prevention: ON)
Initial button setting	-	Execution	Settings of each function are initialized.
Passive Alarm	OFF	ON	Enable when passive alarm is set to "ON".
Passive Alarm	OFF	OFF	Enable when passive alarm is set to "ON".
Door open warning (battery runout prevention)	OFF	ON	If a door stays half shut for 10 minutes, room light, key ring illumination and door warning light related to doors are turned off to prevent battery run-out.
Door open warning (battery runout prevention)	OFF	OFF	Room light, key illumination and door warning light are not turned off.
Dome Light Alarm Setting	OFF	ON	The room light lights by being interlocked with the activation of the alarm.
Dome Light Alarm Setting	OFF	OFF	Room light does not illuminate regardless of alarm operation.

After setting, make sure that vehicle equipment is same as the setting changed in the {Current Data Display & Save}.

CAUTION:

The above settings must match the actual vehicle equipment for proper operation.
Do not change settings except for setting above while setting the functions.
Be sure not to change Factory initial setting except when installing a new body integrated unit.

NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".