LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Tribeca >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Keyless Entry System >> Inspection >> Check Transmitter Battery And Function

Check Transmitter Battery And Function

CAUTION: Be sure to reset the keyless transmitter of other vehicle which is registered to the inspection target vehicle, and the vehicle to which the keyless transmitter is registered for inspection, to the condition before performing the inspection. (Register the keyless transmitter again.)
Step Check Yes No
1 CHECK TRANSMITTER BATTERY. 
  1. Remove the battery from the transmitter. < Ref. to REMOVAL , Transmitter. >
  2. Check the battery voltage. < Ref. to INSPECTION , Transmitter. >
 Is the voltage 2.5 V or more? Go to step 2  . Replace the transmitter battery. < Ref. to TRANSMITTER . >
2 CHECK KEYLESS TRANSMITTER BATTERY. 
Register the keyless transmitter which operates normally on other vehicles to the inspection target vehicle. < Ref. to REGISTRATION OF KEYLESS TRANSMITTER WITH SUBARU SELECT MONITOR , REPLACEMENT, Transmitter. >
  1. Close all the doors and rear gate of inspection target vehicle.
  2. Remove the key from ignition switch.
  3. Using the keyless transmitter, lock and unlock the doors and rear gate of vehicle.
 Can the check vehicle be locked and unlocked properly? Go to step 3  . Due to vehicle malfunction, continue the keyless entry system diagnosis.
3 CHECK KEYLESS TRANSMITTER BATTERY. 
Register the keyless transmitter of inspection target vehicle to the another vehicle which the keyless system operates normally. < Ref. to REGISTRATION OF KEYLESS TRANSMITTER WITH SUBARU SELECT MONITOR , REPLACEMENT, Transmitter. >		 Is the keyless transmitter registered correctly? Go to step 4  . Replace the transmitter. < Ref. to REGISTRATION OF KEYLESS TRANSMITTER WITH SUBARU SELECT MONITOR , REPLACEMENT, Transmitter. >
4 CHECK KEYLESS TRANSMITTER BATTERY. 
Check the registered keyless transmitter battery.
  1. Close all the doors and rear gate of the vehicle which keyless system operates normally.
  2. Remove the key from ignition switch.
  3. Using the keyless transmitter, lock and unlock the doors and rear gate of vehicle.
 Does the vehicle operate lock and unlock normally? The transmitter is OK. Replace the transmitter. < Ref. to REGISTRATION OF KEYLESS TRANSMITTER WITH SUBARU SELECT MONITOR , REPLACEMENT, Transmitter. >
scientia non olet · About LEMON Manuals