LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Brake System) >> Master Cylinder >> Removal

Master Cylinder: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Do not allow brake fluid to come in contact with vehicle body. If it does, wash off with water and wipe away completely.

  1. Drain brake fluid from the reservoir tank completely.
  2. Disconnect the harness connector of the fluid level gauge.
  3. Remove the brake pipe from the master cylinder.
  4. Remove the master cylinder mounting nuts, and carefully remove the master cylinder from the brake booster.
scientia non olet · About LEMON Manuals