LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Automatic Transaxle) >> Reduction Driven Gear >> Removal

Reduction Driven Gear: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from the vehicle. < Refer to REMOVAL , Automatic Transmission Assembly. >
  2. Separate the extension case from the transmission case. < Refer to REMOVAL , Extension Case. >
  3. Set the range select lever to the "P" range.
  4. Lift the crimped section, and then remove the lock nut.
    Fig 1: Separating Extension Case From Transmission Case Using Special Tool
    G08564027Courtesy of SUBARU OF AMERICA, INC.
  5. Using the ST1 and ST2, extract the reduction driven gear.

    ST1 499737000 PULLER

    ST2 899524100 PULLER SET

    Fig 2: Extracting Reduction Driven Gear Using Special Tools
    G08564028Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals