LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback R >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical (H6DO) >> Chain Cover >> Inspection

Chain Cover: Inspection

  1. Check the chain cover surface for scratches or dents.
  2. Check for oil leakage on the chain cover mating surface and installation part of crank pulley. If there is an oil leak from the oil seal, perform replacement with a new oil seal.

    ST 499585700 OIL SEAL GUIDE

    Oil seal press-fit position: 

    Chain cover end face - Position -1 mm 

    (-0.039 in) from the chain cover end face. 

    Fig 1: Replacing Oil Seal Using Special Tool
    G08581320Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals