LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Transmission Harness >> Inspection

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals.
NOTE: For details of transmission harness circuit, refer to appropriate SYSTEM WIRING DIAGRAM article.

Harness continuity standard 

Less than 1 Ω 

scientia non olet · About LEMON Manuals